Terra Cotta Cladding
Terracotta panellas are produced in two types, namely "double-walled" and "single-walled" and double-walled terracotta. It is in compliance with ISO 10545 norms in water absorption, dilatation and freezing resistance. Terracotta plates and carrier profiles fixed with anchors were suspended with specially manufactured wooden holders. The integrity of the facade is provided by placing the profile of the joints in the vertical joints when deemed necessary. The common areas created horizontally between the boards allow natural ventilation under the front.
Compact Laminate Claddings
Compact laminates are self-supporting design papers obtained by superimposing a double face, a few kraft papers, and special liner sheets which are impregnated with special resin under high pressure compatible with exterior conditions. The design papers used on the outer surfaces of compact laminate coatings should be enriched with chemicals that enhance resistance to light and especially ultraviolet (UV) rays and exterior conditions. It is applied in front of the wall along with the rock wool in the cold facade logic.
Three different patterns are applied:
Natural Stone Cladding
Mounting of rock materials with various properties in their own special construction, after the stone wool was laid in front of the wall. Many natural and synthetic looking surfaces are obtained. Rock cover is an increasingly widespread use in the construction industry; modern architecture preserves closed climate because it protects structures from external factors, does not require periodic maintenance, is natural, permanent and aesthetic. Providing advantages to the user, its durability against color fading and freeze-thawing allows it to be used in all conditions.
Composite Panel Cladding
It is a type of coating made with aluminum composite plate which is developed for use on the exterior of buildings and has "fire resistant" (fireproof) properties. In addition to the standard production sizes of the painted surface, products coated with high-resistance protective film in special-purpose dimensions. Available in Solid, Metallic, Glossy (silver), natural stone and wooden patterned colors. Colors are standard 30% of brightness. Production between 30% and 80% of light is possible according to architectural preferences.